September 8, 2020
Soybean grain quality is highest at harvest. The goal for producers is to manage grain storage conditions to help preserve that quality. Soybeans that are stored under cool and dry conditions are relatively safe from fungi and insects – the primary causes of grain damage.
Poor management of stored grain can result in spoilage and loss of market grade. Storing grain at the proper moisture content, making routine grain observations during storage, and managing grain temperature are important to prevent grain storage problems. Monitoring stored soybean is particularly important during the late winter months as mild temperatures begin to warm grain masses.
Moisture
Grain spoilage is influenced by the length of storage period (Table 1). In general, the longer the storage period, the lower the moisture content should be for safe storage.
Soybean moisture level is critical for maintaining storage quality. Soybean grain should be stored at moisture levels of approximately 12% or less. An accurate moisture meter is needed to check moisture levels accurately. Grain temperature can have a large effect on moisture readings. Cold grain generally causes low readings unless moisture has condensed on the surface. All moisture testers show some variability resulting in different readings when the same sample is tested more than once. To limit this effect, test each sample at least three times and average the readings. Seed soybeans should be kept at lower moisture levels. Moisture levels of 11 to 12% are recommended for long-term storage to help mitigate mold growth.
Storage Temperature
Storage temperature plays an important role in the interaction of moisture content and grain quality in storage. Warmer temperatures require drier soybeans to maintain the same quality and allowable storage time. Controlling soybean temperature during storage is critical. Free fatty acid percentages, a negative characteristic that affects soybean oil quality, tend to increase with seed moisture, storage temperature, and time. Therefore, keeping soybean as cool as possible in the spring and summer can help maintain oil quality.
Fall - Aerate continuously at any time when the equilibrium moisture content is acceptable and air temperature is 10°F to 15°F cooler than grain temperature until grain is cooled to 40°F.
Winter - Aerate about every two weeks when air temperature is within 10°F of grain temperature. Store soybeans during the winter near 30°F in northern states and 40°F or lower in southern states.
Spring and Summer - When mean daily temperatures show a steady increase, aerate continuously whenever air temperature is 10°F to 15°F warmer than grain temperature until grain temperature reaches 60°F to 65°F. These temperatures enhance the storage life of soybeans and reduce mold and insect activity.
Improved technology can help manage stored grain, but it should continue to be inspected visually. Temperature cables allow for easy monitoring of the stored grain temperature at several locations, and fan controllers can operate fans according to desired air conditions. However, monitor and verify that fans are operating as desired.
Aerating Stored Soybeans
Aerate stored soybeans to maintain grain temperature between 35° to 40°F in the winter and 40° to 60°F in the summer. These temperatures reduce mold and insect activity and moisture movement within the bin.
Accumulated moisture can be easily managed if the grain is aerated every couple of weeks. Probe the bin periodically to check for insect infestation and grain temperature increase. Grain temperature increase usually means moisture migration. Aerate to try to control heating or other early storage problems. If that fails, move, re-dry, or sell the beans.
Fungi and Insects
Fungi and insects are fueled by high moisture levels and are more apt to occur in grain with many damaged kernels or trash. High temperatures and high humidity set up an excellent scenario for fungi to grow. Once grain is cooled down to 40°F, the likelihood of fungi growth is much less. Fungi are the most important cause of soybean damage in storage. Insects are more likely to attack damaged beans – either from handling damage or being damaged by some other source, such as fungi.
Soybean Storage Recommendations
Cool the grain off as soon as possible in the fall. Target temperatures should be initially around 60°F.
Continue to aerate and uniformly cool grain to between 30°F to 40°F if possible. This will help avoid internal moisture migration and insect activity.
Monitor soybeans at least once every two weeks during winter storage and weekly during the fall until the grain has been cooled to winter storage temperatures.
Keep the grain cool for as long as possible into the early spring.
Monitor the soybeans weekly during the spring and summer. Measure the grain temperature and watch for indications of problems such as condensation, insect activity, and increasing grain temperatures. Record temperature values and grain conditions to help track any changes.
Cover fans and openings when not in use to help avoid air, moisture and potential insect movement. Ventilate the top of the bin to reduce solar heat affecting the beans at the top of the bin.
Monitor carefully and fumigate if needed.
Inspect soybean surface at least every week throughout the storage period.
Sources:
Hellevang, K. Enhancing soybean storage starts with harvest moisture. Extension Alert. North Dakota State University Extension. https://www.ag.ndsu.edu/ndsuag/.
Hurburgh, CR Jr. November 2008. Soybean drying and storage. Pm-1636. Iowa State University Extension. http://crops.extension.iastate.edu.
Storing soybean. Integrated Pest Management. Iowa State University. http://crops.extension.iastate.edu.
Sadaka, S. March 2014. On-farm drying and storage of soybeans. Arkansas Soybean Production Handbook, Chapter 15. University of Arkansas Extension. http://uaex.edu
Verified 8/31/2020
8010_S1